Validation Equipment Rentals

Masy Systems offers complete validation equipment systems for rent with current NIST traceable and A2LA accredited to 17025 calibrations (where noted ) certificates. Complete systems can include a pre-programmed validation datalogger with thermocouples, pressure or humidity sensors. Also available for rent are validation dataloggers, temperature reference baths, temperature and calibration standards and miscellaneous validation accessories.

Before renting, we encourage all users to read through our Quick Reference Guides to ensure familiarity with handling, using and storing the validation equipment.

Validation Dataloggers
GE Kaye Validator 2000	includes 1 SIM (12 channels) Validator 2000 software v. 2.30 installed
Validated V2000 Dataloggers are available as rental units with purchased IQ/OQ Protocol Execution and Documentation. Read about Validated Systems.
GE Kaye Portable Validator	includes 1 Scanner (16 channels)
GE Kaye KL Validator	includes 1 Scanner (16 channels)
GE Kaye Digistrip 4+	includes 1 Scanner (16 channels)
GE Kaye Digi-Link 4+	includes 1 Scanner (16 channels)
Additional SIMs and Scanners	for V2000 or Digi Dataloggers
Quick Disconnect Panel	for Digistrips
PC Notebook Workstation	DOS and WIndows Validator and Validator 2000 software v. 2.30 installed

Temperature Standards
GE Kaye IRTD-400	Range: -196ºC to 400ºC Accuracy to ± 0.025ºC

Temperature Reference Baths
GE Kaye LTR-140 (-25ºC & -40ºC models)	Range: -25ºC or -40ºC to 140ºC Accuracy: ±0.1ºC to ±0.4ºC
GE Kaye HTR-400	Range: Ambient to 400ºC Accuracy: ±0.2ºC to ±0.4ºC
GE Kaye CTR-80 / Hart Scientific 7380	Range: -80ºC to 30ºC
Note that -80ºC baths are large, heavy (125lbs+) and require crating and special handling. We would prefer that the baths be picked up or delivered, but if that is not practical, we will ship as fragile freight. Please contact us for an estimate.
GE Kaye 140-4 Ice Point	Ice Point 0ºC Accuracy: ±0.02ºC
Hart Portable Furnace 9150	Range: 150ºC to 1200ºC Accuracy: ±5ºC
Hart Silicone Oil Bath 7103S*	Range: -30ºC to 140ºC Accuracy: ±0.3ºC
Hart Handheld Drywell Bath 9100*	Range: 35ºC to 300ºC Accuracy: ±0.5ºC to ±1.0ºC
Hart Handheld Drywell Bath 9102*	Range: -10ºC to 122ºC Accuracy: ±0.5ºC to ±1.0ºC

Calibration Standards
Rosemount Pressure Transducer	Range: 0-100 psia Accuracy: ± 0.5% of Full Scale
International Light, UV Wide-band A	Range: 0 mW/m² to 14 W/m²
International Light, Illuminance	Range: 0 mLux to 40 KLux
Monarch Tach 4 Tachometer	Optical Range: 1 to 250,000 RPM

Miscellaneous
Met One Particle Counter (models 2408 and 3423)	Flow Rate: 1.0 CFM and 1.77 CFM Channel Sizes: 0.3 to 10.0 micron particle (varies between models)
Thermocouple Feedthrough*	Designed for Sterilizers/Autoclaves; SS
Thermocouple Welder*	Arc welder for thermocouple tip welding
Multimeter	Measures voltage (AC/DC), current, resistance, capacitance
Vaisala HMI31 RH/Temp Meter	Portable digital meter Accuracy: ± 5%RH, ± 2ºC
VAPORTRON H100BL/H100CL Series Portable Humidity Lab	Portable humidity calibrator Accuracy: ± 1.5%RH max between 20-90%RH
Thermal Range Rover	Performance testing on shipper containers under precise environmental conditions (-30ºC to 60ºC).

Validation Sensor Assemblies
Relative Humidity Sensor Assembly	Range: 10%RH to 100%RH, -30ºC to 70ºC
HygroLogger Temperature/RH Assemblies	Includes Windows software and PC RS-232 cable
CO2 Assemblies	Range: 0%CO2 to 10%CO2
Relative Humidity Calibration Three Point Ambient RH Calibration (20%, 35% & 85%RH @ 23ºC) Accuracy: ± 1.2%RH over range 20%RH to 85%RH @ 23ºC. Specific Point RH Calibration @ ICH* Points Accuracy: ± 1%RH @ 25ºC/60%RH, 30ºC/60%RH, 30ºC/65%RH, 30ºC/75%RH (New Point!) , 40ºC/75%RH Specific Point Calibration @ customer-defined non-ICH Points Accuracy: ± 1%RH @ specific point CO2 Calibration Three Point CO2 Calibration Calibration @0%CO2, 5%CO2, check at 10%CO2 Single Point CO2 Calibration Calibration at 5%CO2 *ICH (The International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use) has set a number of guidelines in regards to temperature and relative humidity control for stability chambers and stability rooms for the pharmaceutical industry. The ICH Q1A Guideline - "Stability Testing of New Drug Substances and Products (Second Revision) " provides recommendations on stability testing protocols including temperature, humidity and trial duration.

 Includes current NIST traceable calibration certificates (except where noted*)

All equipment undergoes a verification or calibration when received from each rental. In the event of an out of tolerance condition a nonconformance report will be generated and the customer will be notified.

To request a quote, place an order or receive more information, please: